T63 Thermal Transfer Printer Technical Specifications
Print technology: Thermal transfer (does also handle Direct thermal labels)
Maximum print width: 162 mm
Maximum print length: 350 mm
Label size (W x L): 80x20 mm to 178x400 mm (applicator specific)
Maximum media width: 180 mm
Printable area: 100% thanks to automatic rewind of each label
Applicators: BlowVAC, Belt, Tamp, eTamp, Wipe G2, Wipe90 G2, QuickTamp, FlexWipe pallet labeling system
Resolution: 300 dpi
Print speed: Printing speed Default 160 mm/s (max. 200 mm/s)
Historically compensated print function: Built into the control unit
Heat compensated print function: Built into the control unit
Fonts: Truetype, Unicode
Barcodes: EAN-13, EAN-8, CODE128, GS1-128, GS1-Databar (+ Exp, Limit, Stack, Stack Omni, Exp Stack), Interleaved 2 of 5, UPCA
2D codes: Datamatrix, PDF-417, QR code
External dimensions, excl. applicator (LxWxH): 440x420x485 mm
Label roll outer diameter (max): 12" / 300 mm
Label roll core diameter: 3" / 76 mm
Label roll winding: Labels on the outside of the roll
Ribbon roll outer diameter (max): 3,4" / 85 mm
Ribbon roll core diameter: 1" / 25 mm
Ribbon ink side: Inside
Communication: Ethernet/LAN, USB, CANopen, RS-232
Operating temperature: +5°C to +40°C (down to -28°C provided that the power is always switched on)
Humidity: 20 to 85%, non-condensing
Mains supply: 110/240 VAC, 50/60 Hz
Air supply: 6-10 bar, clean and dry
Accessories
1. Touch screen
From the 10.4” touch screen the operator can easily change products and settings.
2. Status beacon
The status tower provides an easy way to monitor the machine status from a distance.
3. Control Panel
From the Control panel the operator can easily stop, reset and start the printer.
4. Trigger sensor
Evolabel offers a reflecting PNP trigger sensor from SICK, which fits most applications. The machine can interface to any 24V PNP trigger from other suppliers.
5. Mounting kit
This is the standard robust stainless steel mounting kit from Evolabel. It will fit most applications. It is intended to be used with the pillar stand (6).
6. Pillar stand
This pillar stand of anodized aluminium can either be mounted directly on the floor or onto the stand foot (7). The pillar stand is also available with motorized height adjustment.
7. Stand foot
The stand foot is a robust powder coated aluminium foot with wheels and adjustable machine feet covered with rubber for good positional stability.
