QuickTamp Applicator Technical Specifications 

The Evolabel QuickTamp G2 applicator is developed with ease of use, reliability, and safety in focus. It is fully automatic and no daily adjustments or calibrations are required. The applicator works with a linear motion and is specially designed for print and apply applications with high demands on speed and precision. It is primarily designed for top labeling, but may also be used for side labeling. 

The tamping rod of carbon fiber together with the drive roller configuration equipped with traction control and automatic wear monitoring, ensure high performance throughout the lifetime of the applicator. 

The QuickTamp G2 is designed to use the Evolabel patented applicator pad range for optimal label handling. This is obtained by creating vacuum locally in the pad through feeding of compressed air from the applicator. Vacuum is only present when the applicator is in print position. During the apply, the high speed of the QuickTamp G2 makes it possible to turn off the use of vacuum. 

The QuickTamp G2 can be mounted on all Evolabel printers and is easily mounted with two screws, a tube for compressed air, and an eApplicator cable for the electronic interface. 

The applicator is controlled by the printer, normally by using the signal from an external photo sensor as a direct input to detect the product to be labeled. For information about the printers, we refer to the manual Installation, Maintenance & Service D43/T43/T63

Together with the custom designed Evolabel software, the QuickTamp G2 may be equipped with a height sensor to handle packages of different heights in the same batch, yet labeling in a continuous and accurate flow. It may usefully also be equipped with a motorized stand to control label positions in a further dimension and to easily adjust to conveyors and other peripherals. 

Part number: 

QuickTamp G2 400: K100306, CW: K200306 

QuickTamp G2 600: K100307, CW: K200307

QuickTamp G2 800: K100308, CW: K200308

QuickTamp G2 1000: K100309, CW: K20030

QuickTamp G2 1200: K100164, CW: K200164

Suitable printer models:  D43, D43 CW, T43, T43 CW, T63, T63 CW

Minimum label size (from above):   D43/T43: 30x20 mm,  T63: 115x20 mm

Minimum label size (from side):   D43/T43: 40x40 mm,  T63: 115x40 mm

Maximum label size (WxL):  D43/T43: 118x240 mm, T63: 176x240 mm

Maximum noise level during apply sequence: 65 dB 

Maximum noise level during apply sequence: 65 dB 

Maximum noise level during print sequence (support blow and vacuum): 75 dB 

Surrounding temperature (operation) +5°C to +40°C 

Surrounding humidity 20 to 85% 

Air supply: 6 bar, clean and dry

Label apply technology:  Step motor driven, linear motion with tamping rod 

Stroke length (Effective apply distance) : 

QuickTamp G2 400: 0 - 478 (0 - 400) mm 

QuickTamp G2 600: 0 - 678 (0 - 600) mm 

QuickTamp G2 800: 0 - 878 (0 - 800) mm 

QuickTamp G2 1000: 0 - 1078 (0 - 1000) mm 

QuickTamp G2 1200: 0 - 1278 (0-1200) mm

Apply speed: Dependent on tamp rod length and pad size

External dimensions (WxHxD);

Chassis only: 214 x 165 x 205 mm 

Chassis and tamping rod: 214 x (length of rod) x 205 mm

Air consumption during label apply: ~ 0.1 l/min (no air used during label apply) 

Communication: EXT 1 (RS-232)

Power supply: DC input: 24 VDC / 4.0 A

 Capacity (depends on label size, stroke length, arm length, apply speed): Dependent on tamp rod length and pad size 

Applicator weight:

QuickTamp G2 400: 5.85 kg 

QuickTamp G2 600: 5.90 kg 

QuickTamp G2 800: 5.95 kg 

QuickTamp G2 1000: 6.00 kg  

*Sizes outside the intervals are not part of the standard offer, please contact Evolabel for more information.