FlexWipe Pallet applicator technical specifications 

Evolabel FlexWipe pallet applicator is a safe, compact, fast and easy to use solution for tough industrial environments. 

The FlexWipe is releasing flexibility due to both the compact nature of the unit and the same applicator can label all three sides towards the system. 

It is built upon two servo controlled rotating movements. The inner monocoque arm can rotate 360º and the labels can leave the printer in two directions (patent pending). The outer arm holding the applicator pad can rotate 200º. 

A camera based scanner is located behind the applicator pad. When a validation check scan is required the arms move and turn 180º to an optimal reading position, where all printed barcodes are checked.

Example of label position (symmetric). Here at minimum recommended clearance of 50 mm between applicator and pallet, which position the labels 237 mm from the pallet corner.  

Multi Side labeling

Suitable printer models:   T63 G2 

 Minimum label size:   80x80 mm

 Maximum label size (WxL):   178x240 mm

 Label height position (top of label:  Standard 770 +/- 400 mm

 (Optional 1270 +/- 400 mm)

 Label position (symmetric) at  min distance (50 mm) between  applicator and pallet : 237 mm from pallet corner to  near edge of A5 label

 Minimum separation between  pallets: 750 mm 

 Label position (assymetric) at  smallest possible separation  between pallets (450 mm): 

Front/Back label: 50 mm from pallet corner to near  edge of A5 label

Side label: 343 mm from  pallet corner to near edge of  A5 label

Distance between applicator  and pallet: 215 mm

Air supply: 6 bar, clean and dry

Capacity (2-side labeling): Exceeds 5 pallets/min

Dimensions (WxDxH): 916x610x2047 mm

 Weight ( applicator): 9 kg

 Weight (T63 printer+applicator):  38 kg

 Weight (FlexWipe,T63 + stand): 82 kg


 Models: One model for any side

Operating temperature: +5°C to +40°C 

Humidity: 20 to 85%, non-condensing

Pivotable Machine Mount Principle 

The pivotable machine mount takes away crushing hazards between the moving pallet and the pallet applicator. If a person gets between the moving pallet and the applicator (pos Y1) the applicator will rotate from its operation position X1 towards X2 and further.

This will leave room for the person between the pallet and the system (pos Y2). The system will also detect and alarm so the production line can be stopped. The pivotable machine mount can turn 90 deg counter clock wise and 180 deg clock wise.