Products‎ > ‎Wipe G2 Applicator‎ > ‎

wipe-g2_spec

Wipe G2 applicator technical specifications

The Evolabel Wipe G2 applicator is developed with ease of use, reliability, and safety in focus. It is fully automatic and no daily adjustments or calibrations are needed. The applicator works with a rotational, stepper motor driven motion and is built with the Evolabel patented applicator pad range to achieve optimal label handling. The patented pads create vacuum locally by feeding compressed air from the applicator.

The Wipe G2 can be mounted on all Evolabel printers and is easily mounted with two screws, a tube for compressed air, and an eApplicator cable for the electronic interface.

The applicator is controlled by the printer, normally by using the signal from an external photo sensor as a direct input to detect the product to be labeled. 

The Wipe G2 applicator is designed for print and apply systems with high performance; primarily corner wrap top-front labeling or top and/or front labeling. The applicator can be equipped with a motorized stand to handle batches with varying product heights and label positions.
A print and apply application with a Wipe G2 normally feeds the labels horizontally with the printed side facing up. The feed direction is usually backward relative the product conveyor's direction. See examples of usage below. The applicator has arm length of 125, 150, 175, 200, 250 or 350 mm and handles labels with sizes from (30‐118) x (20‐240) mm with D43/T43 and (115‐176) x (20‐240) mm with T63.

 Suitable printer models D43, T43, T63
 Minimum label size (WxL) D43, T43: 30x20 mm
 T63: 115x20 mm
 Maximum label size (WxL) D43, T43: 118x240 mm
 T63: 178x240 mm
 Label apply technology Stepper motor driven arm with encoder
 Max apply angle 192°
 Apply speed Dependent on arm length and pad size
 External dimensions (WxHxD) (50 + S) x 345 x 218 mm where S = Arm length
 Communication EXT 1 (RS-232)
 Applicator weight
 Wipe G2 Applicator 125
 Wipe G2 Applicator 150
 Wipe G2 Applicator 175
 Wipe G2 Applicator 200
 Wipe G2 Applicator 250
 Wipe G2 Applicator 350
 
 5,70 kg
 5,85 kg
 6,01 kg
 6,17 kg
 6,57 kg
 7,37 kg
 Compressed air supply 6 bar, clean and dry
 Power supply DC input: 24 VDC / 4.0 A
 Capacity (depends on label size, stroke length, arm length, apply speed) Up to 80 labels per minute
Wipe G2 monting on Evolabel T43:
Wipe G2 has 6 different arm lengths:
plus 125, 150 and 175 mm