T63_spec

T63 technical specifications

 Print technology Thermal transfer (does also handle Direct thermal labels)
 Maximum print width 162 mm
 Maximum print length 240 mm
 Label size (W x L) 80x20 mm to 180x240 mm (applicator specific)
 Maximum media width 180 mm
 Printable area 100% thanks to automatic rewind of each label
 Applicators BlowVAC, Belt, Tamp, eTamp, Wipe G2, Wipe90 G2,
 QuickTamp, FlexWipe pallet labeling system
 Resolution 300 dpi
 Print speed Up to 200 mm/s
 Historically compensated print function Built into the control unit
 Heat compensated print function  Built into the control unit
 Fonts Truetype, Unicode
 Barcodes  EAN-13, EAN-8, CODE128, GS1-128, GS1-Databar (+ Exp,  Limit, Stack, Stack Omni, Exp Stack), Interleaved 2 of 5,  UPCA 
 2D codes Datamatrix, PDF-417, QR code
 External dimensions, excl. applicator (LxWxH) 440x420x485 mm
 Label roll outer diameter (max) 12" / 300 mm
 Label roll core diameter 3" / 76 mm
 Label roll winding Labels on the outside of the roll
 Ribbon roll outer diameter (max) 85 mm
 Ribbon roll core diameter 1" / 25 mm
 Ribbon ink side Inside
 Communication Ethernet/LAN, USB, CANopen, RS-232
 Operating temperature +5°C to +40°C
 Humidity 20 to 85%, non-condensing
 Mains supply 110/240 VAC, 50/60 Hz
 Air supply 6 bar, clean and dry

Accessories

1. Touch screen

From the 10.4” touch screen the operator can easily change products and settings.

2. Status beacon

The status tower provides an easy way to monitor the machine status from a distance.

3. Trigger sensor

Autolabel offers a reflecting PNP trigger sensor from SICK,

which fits most applications. The machine can interface to any 24V PNP trigger from other suppliers. 

4. Mounting kit

This is the standard robust stainless steel mounting kit from Autolabel. It will fit most applications. It is intended to be used with the pillar stand (5).

5. Pillar stand

This pillar stand of anodized aluminium can either be mounted directly on the floor or onto the stand foot (6). The pillar stand is also available with motorized height adjustment.

6. Stand foot

The stand foot is a robust powder coated aluminium foot with wheels and adjustable machine feet covered with rubber for good positional stability.